Are you having trouble with your Hyundai Clock not working? If so, you are not alone. Many drivers have reported that their Hyundai clock has stopped working and they are not sure why.
I’m going to share the most common reasons why your Hyundai clock may have stopped working and provide you with some tips on what you can do to fix it.
As well as providing you with helpful advice on how to maintain your Hyundai clock to prevent future issues.
Why Is My Hyundai Clock Not Working?
There are several potential issues that can cause your Hyundai clock to stop working correctly, and for it to show the wrong time. The most common causes of Hyundai clock malfunctions include a dead battery, a faulty clock module, a system update error, or a blown fuse. If your Hyundai clock is not functioning properly, there are a few steps you can take to troubleshoot and fix the issue.
First, you should check to make sure that the car battery is still in good condition. A dead battery can prevent the clock from working correctly, as it needs access to the power button in order to keep accurate time. If the battery is low, you should replace it in order to get the clock working again.
Next, the clock module should be checked. The module is responsible for connecting the clock itself to the car battery, and if it’s faulty, the clock will not work correctly. You should check for any visible damage or corrosion, as well as ensuring that the connections are secure.
If the clock is still not working, you should check to make sure that the car has not recently undergone any system updates that may have affected the clock. If a system update has occurred, you will need to reset the clock according to the update instructions.
How To Diagnose The Cause of Your Hyundai Clock Problem
Diagnosing the cause of your Hyundai clock problem can be done by following a few steps. First, it is important to check if your vehicle’s fuse box is working properly and that all interior fuses related to the clock are functional.
Check that the time settings on the clock have not been changed. If the fuse and time settings are both in order, then the clock itself may be malfunctioning. In this case, you may need to remove the clock unit from your vehicle and take it to a certified technician for repairs.
Check the Fuse Box & The Battery In The Fuse Box
If the battery in your Hyundai clock is depleted or malfunctioning, it may be the cause of your clock not working. To determine this, you will need to check the battery and the fuse box / fuse holders. Ensure you’re using the correct fuse within the fuse panel.
First, open the engine compartment of your Hyundai. You can do this by locating the hood release lever and pulling it, releasing the hood latch. Use a flashlight to look for the fuse box and its battery.
The battery in your fuse box should be securely connected. If it is not, then it could be the reason your clock is not working. If the problem is not with the battery itself, it could be from a faulty connection. Look at the connections to make sure they are all secure. If there is corrosion or damage to the terminals, the connection is not secure and it needs to be replaced.
Once you have checked for any faulty connections or corrosion, take the battery out of the box and check it for any signs of wear and tear or corrosion. If it looks worn out or it has signs of corrosion, it may need to be replaced. If the battery looks fine, it could just be low in charge, so charge it up and try to power up your clock with it.
If the battery is found to be in poor condition, the fuse box may still be the culprit. Look for any bad connections or signs of corrosion. If the fuse box is not the problem, the clock may need to be replaced.
Inspect the Radio Wiring Harness
Although there can be several causes for a non-functioning clock, inspecting the wiring harness is a key step in determining what needs to be fixed.
Start by removing the trim panel from the dashboard and locating the radio wiring harness. This is usually a black piece of plastic with several small metal tabs, and it will have a small amount of exposed wiring. Gently pull the harness out of the dashboard and inspect each of the wiring connections.
Look for any signs of damage, such as exposed wires or broken connections. The wiring harness should be securely connected to the radio and the dashboard. Make sure that all of the connections are clean and tight. If any of the connections are loose, tighten them with a small screwdriver.
It’s important to check the wiring itself. Look for any signs of corrosion, fraying, or broken wires. If any of the wiring connections appear to be damaged or broken, it’s best to replace the wiring harness.
If the wiring connections are in good condition, the next step is to inspect the radio itself. Make sure that the radio is securely plugged into the dashboard and that the wiring connections match the connections on the back of the radio.
Finally, consult the owner’s manual to make sure that the clock is set correctly. If the clock settings are incorrect, the clock won’t function properly. Once you’ve verified that all of the connections are in good condition and the settings are correct, you can try resetting the clock to see if it works.
Test The Clock Settings
This is a simple process that can help you quickly determine if the clock settings need to be adjusted, or if the issue is with the hardware or other parts of the vehicle.
First, start the vehicle’s engine and make sure that the clock is visible on the dash. If the clock is not visible, you should check the fuses in the car to make sure that they have not blown. If the fuses have blown, you will need to replace them with new ones.
Next, make sure that the clock is set to the correct time. To do this, turn the “Hour” and “Minute” dials and set the clock to the current time. Make sure that the “AM” or “PM” setting is correct as well. Once the clock is set, press and hold the “Set” button for at least three seconds to save the new clock settings.
Now, wait for some time and then check the clock again to see if it has changed. If the clock is not displaying the correct time, then you can proceed with troubleshooting other components for the clock.
However, if the clock is displaying the correct time, you can be sure that the clock settings are fine and the issue may be with another component of the car.
Your GPS Location Might Be Weak
When you first set up your Hyundai, you agreed to the terms and conditions that gave the car’s system access to your GPS location. This allowed it to use the best satellites to maintain an accurate time, as well as giving you the ability to view the clock display in multiple timezones.
However, this connection to your GPS could be the cause of your clock not working, as could satellite issues. If the signal has become weak, or your GPS location has changed, this could affect the accuracy of the clock and lead to it no longer working.
To check if this is the case, you can open the Hyundai navigation menus and check the settings. Usually, it will state which satellites the clock is accessing. If there are no satellites listed, or the signal strength is low, then it is likely that your GPS location is weak and needs to be updated.
If this is the case, then you will need to find a way to improve your GPS signal. Usually, this means moving to a different location where there is a stronger signal, or using a signal booster.
Verify Proper Power to the Clock
In order to troubleshoot the power supply of your Hyundai Radio & clock display, you’ll first want to locate the 12V power outlet near the glove box. Make sure the outlet is still connected and all of the wires are securely attached to the clock controls.
Then, use a voltmeter to check the power supply. If the power source is functioning correctly, the voltmeter should read at least 11.6 volts. If not, the power source is faulty and should be replaced.
If the power source is intact, check the fuse box. If the fuse box is corroded or has blown fuses, it will need to be replaced or repaired.
If the fuse box is functioning normally, check the fuses associated with the clock. These fuses can be identified by their label and the user manual. If a fuse is blown, replace it with a new one of the same exact amperage rating.
Try Resetting Your BlueLink
BlueLink is an infotainment system available on selected Hyundai vehicles, like the Hyundai Santa Fe, and it provides access to a variety of features, including the ability to adjust the vehicle’s digital clock.
If your Hyundai has BlueLink, you can try resetting the system as a first step towards fixing the clock. To do this, you will need to use the MyHyundai app. Here are the steps to resetting your BlueLink with the MyHyundai app:
1. Download the MyHyundai app on your smartphone and create an account.
2. Log into the app and connect your smartphone to your Hyundai’s BlueLink system.
3. Once the connection is established, navigate to the Blue Link settings menu in the app.
4. Select “Reset BlueLink” and follow the instructions on the touch screen.
5. After the reset is complete, your clock display should be reset, and your clock issues fixed.
Press The Reset Button With A Paperclip
If you find that your Hyundai clock is not functioning correctly and you cannot seem to figure out why, the likely culprit is a corrupted internal clock setting, as it’s one of the common issues with Hyundai vehicles. Fortunately, you can easily reset your Hyundai clock with a paper clip or a similar thin object.
To correctly reset the clock on your Hyundai, first locate the clock reset button. This button is typically located at the corner of the unit, near the bottom edge. You may need to use a flashlight to find it. Once located, you will need to use the paperclip to press the reset button. This will cause the clock to reset and return to its default settings.
Remember to make sure that the paper clip is pressed firmly against the reset button in order to reset the clock correctly. If the paperclip does not fit in the reset button slot, use a twisted paper clip. Once the reset button is pressed, the display will turn off and the clock will reset to its original time.
If resetting the clock does not work, you may need to replace the battery. To replace the battery, remove the battery cover and take out the old battery. Insert a new battery of the same size, making sure that the positive and negative terminals are oriented correctly. Close the battery cover and turn on the display. The clock feature should now be working properly.
Remove Your Navigation SD Card To Reboot The Clock
If your Hyundai car’s display clock is not working properly and you are looking for a fix, then the first step you should take is to remove your navigation SD memory card. This is a simple yet effective way to reboot the clock.
Removing the SD card usually clears up any issues that are causing the clock function to malfunction. To remove the SD card, open the glove compartment of your vehicle. Once you have opened it, you should be able to locate the SD card. Pull out the card and make sure it is properly removed.
Before you put the SD card back in, make sure that you replace it with a new one. This is important because if the card is damaged then it could be the cause of the clock malfunctioning. Once you are sure that the card is working properly, you can place it back into the glove compartment.
Now, you can restart your car. This will help reset the clock. You may also have to adjust the time settings manually. To do this, hold down the time reset button until you see the time displayed. You can then adjust the clock to the correct time.
Try Speaking To Your Hyundai Dealer
If you’ve tried all the troubleshooting steps but can’t seem to get your Hyundai clock working over a couple of days, the best thing to do is to contact your Hyundai dealer. Not only can they provide more comprehensive advice and help diagnose the problem, they may have the necessary tools and parts that can fix the issue.
Be sure to bring your car to the dealership and let them know exactly what the problem is so they can provide accurate advice.
Repairing Your Hyundai Clock Issue
To do this, you can go to the manufacturer’s website and download the update files. Once you have downloaded the update file, you should follow the instructions provided with the update to properly install the update.
If the issue is related to the hardware, your best option is to take your vehicle to a qualified Hyundai service center. There, a qualified technician will be able to diagnose the issue and provide you with the necessary repairs.
Keep in mind that if you’re having difficulty with the software, you may need to take your vehicle to a Hyundai dealership in order to have the issue addressed.
Replacing a Bad Fuse
First, locate the fuse box in your Hyundai and find the fuse labeled ‘clock’. This will likely be either a 5 amp, 10 amp, 15 amp, or 20 amp fuse, depending on the model year. Once you’ve located the fuse, twist it counterclockwise to remove it.
Next, head to an auto-parts store and purchase the same-sized fuse as the one you removed. Once you have the new fuse, place it in the socket in the fuse box and twist it clockwise to secure it in place. Make sure the fuse is firmly inserted and seated properly in the fuse box.
Once the new fuse is placed, switch the ignition on and test to see if your clock is now working. If it is, great. The issue has been resolved. If not, you may have a different issue causing the clock to malfunction and should seek professional help.
If your clock is working, be sure to store the old fuse in a safe place in case the new one fails in the future. Keep a spare fuse in your glove box or tool box for quick replacement in the event that the clock stops working again.
Replacing a Faulty Wiring Harness
Your wiring harness forms the backbone of the electrical system in your vehicle, transferring data, electricity and signals between the different components of the vehicle. Replacing a faulty wiring harness in your Hyundai can be a complex process, but with the right tools, you can do it.
First, you will need to identify which wiring harness needs to be replaced. To do this, get a wiring diagram for your vehicle and compare the diagram to the actual wiring in your car. This will tell you which wiring harness is faulty and needs to be replaced.
Once you have identified the faulty wiring harness, you will need to remove it. Start by disconnecting the battery to ensure there is no electrical current running through the wires.
Then, use pliers and cutters to remove clamps or fasteners holding the wiring harness in place. Make sure to keep track of all the mounting brackets and fastenings so you can properly connect the new wiring.
Next, it’s time to install the new wiring harness. To do this, you will need to refer to the wiring diagram for your vehicle, as different models of Hyundai’s have different wiring configurations. Start by connecting the positive and negative battery terminals, then use the diagram to properly connect all the wires in the new harness. Make sure to double check all connections before you connect the battery and turn it on.
Finally, you will need to test the connections to make sure the new wiring harness is working properly. If everything is connected correctly, the clock should be working properly. It’s always a good idea to test the clock with a multimeter to make sure the connection is correct and the clock is functioning correctly.
How To Maintain Your Hyundai Clock To Prevent Future Issues
It is important to check and make sure the clock is receiving enough power to operate. In most cases, the power source for the clock will be the vehicle’s cigarette lighter or the car’s power outlets.
If either of these is not providing enough power, the clock may not work properly. You may need to replace the clock’s battery if it is more than a few years old.
Second, make sure that any fuses related to the clock are not faulty. The fuse box in your Hyundai will usually be located in the cabin near the dashboard. In most vehicles, fuses can be checked and replaced by following the manufacturer’s instructions.
Third, make sure all of the clock’s internal wiring is in good condition. Ensure that all of the wiring is connected properly and that no wires have become disconnected, which could prevent the clock from functioning properly.
Check for any damage to the clock’s wiring, rust, or corrosion, which could be causing the clock to work intermittently.
Ensure that the clock is properly programmed and synchronized with the rest of your vehicle’s electronics. This can be done either manually or through the onboard computer. In either case, it is a good idea to periodically check the clock’s settings, as the clock may drift over time.
Replacing a Broken Clock Unit
Replacing a broken clock unit is a fairly straightforward repair, so if you are comfortable performing basic maintenance on your vehicle, you should be able to successfully replace your broken clock. Here is what you will need to do to replace a broken clock unit in your Hyundai:
First, you must locate the broken clock unit. On most Hyundai models, the clock unit is located on the dashboard, typically to the right of the steering wheel. You may need to remove the radio trim to access the clock unit.
Once you have found the clock unit, you need to remove it. The clock unit is held in place by two screws that can be unscrewed with a Phillips-head screwdriver. After removing the screws, the clock unit can simply be pulled free from the dashboard.
Now that the broken clock unit has been removed, it is time to install the new clock unit. Before doing so, make sure to clean the area where the clock unit will be mounted and that the screws are snug. Then, align the new clock unit with the screw holes and press it into place. Secure the unit with the two screws and make sure everything is secure.
Finally, you will need to reconnect the clock unit to the wiring harness. There should be a small connector attached to the back of the clock unit, which can simply be plugged into the wiring harness. Make sure that the connection is secured and then you should be good to go.