Have you ever gone for a swim with your trusty Fitbit only to have it stop working afterwards? If your Fitbit has stopped working after swimming, don’t worry, there is a fix!
Fitbit Stopped Working After Swimming – What Could Be The Reason?
Fitbit is a great device for tracking fitness, but it can stop working after you take a dip in the pool or jump into a vigorous bath. Here are some potential reasons why your Fitbit might have stopped working after swimming:
- Your Fitbit was wet and damaged from the water: If your Fitbit was wet when it stopped working, it could be ruined and require replacing.
- Your electronic sensor may have been affected: The electronic sensors inside most Fitbits work best when they’re dry. However, even if your Fitbit isn’t wetted down completely, rainwater can get inside the housing and affect how well the sensor records data. This is especially common with swimwear that’s designed to keep water out of the electronics area.
- A software bug may be causing problems: Sometimes when something new (like swimming) gets added to a device’s software, there can be glitches that cause sensors to misread data or malfunction altogether. If your device has recently been updated with new software, try restarting it and checking for updates again before considering repairs or replacements.
How To Prevent Your Fitbit From Getting Wet?
Water and electronics don’t mix. That’s why it’s important to take measures to prevent your Fitbit from getting wet. While Fitbit is designed to be water-resistant, they are not waterproof.
This means that they can withstand sweat and splashes, but they should not be submerged in water. To protect your Fitbit from water damage, avoid wearing it while swimming or taking a shower. You should also remove it before applying lotion or sunscreen, as these can cause the band to degrade over time.
My Fitbit Is Wet – Now What Do I Do?
If your Fitbit has been wet and stopped working, there are a few things that can be done to try and fix the issue. First, make sure that the device is dried off completely before trying to use it again. However, if this doesn’t work, or you have reached your device’s warranty period, you may need to send the device in for repairs.
To prevent your Fitbit from getting wet in the first place, always make sure that it is stored safely away from water and other liquids. Additionally, avoid wearing your Fitbit when taking any baths or showers – instead store it in a pouch or case when you’re not using it.
How To Dry A Wet Fitbit?
Do Not Use a Hairdryer on Your Fitbit
If your Fitbit is wet, do not use a hairdryer on it. Instead, let it air dry.
Submerge Your Fitbit in A Bowl of Rice
If your Fitbit is wet, submerge it in a bowl of rice for a few minutes to dry it out.
Use a Lint-Free Cloth to Gently Dab Your Fitbit Dry
If your Fitbit has stopped working after swimming, there is a good chance that it is wet. To fix the issue, first remove as much water as possible from the device by following these instructions:
- Remove any accessories or buttons from the Fitbit
- Place the device in a bowl of cool water for 10 minutes
- Take the device out of the water and place it on a clean surface
- Allow it to air dry. If you have access to a hairdryer, feel free to use it on low heat to speed up this process. If not, gently blot with a lint-free cloth. Do not rub; just let gravity do its job.
Once dried, try recharging the device by following these instructions:
- Disconnect the Fitbit from your computer and plug it into a wall outlet
- Remove the battery
- Replace the battery and connect the Fitbit to your computer
- In the Fitbit app, select “Settings” and then “General”
- Select “Reset Device.” If all goes well, you will see a message stating that your device has been reset.
Place Your Fitbit in A Well-Ventilated Area
Swimming with a wet Fitbit can cause the device to stop working. If your Fitbit is not syncing or tracking properly, it may need to be dried off before continuing use. To dry your Fitbit:
- Remove the battery cover by pressing down on one end and twisting it counterclockwise.
- Gently shake the device to remove excess water.
- Place the Fitbit on a flat surface where it will not be damaged by blows from a fan or Ac/DC adapter.
- Turn on the fan if desired and leave the device plugged in overnight (12-24 hours). The next day, turn off the fan and remove power from the device by unplugging it from the wall.
- Remove the battery and place it in a safe place.
- Wipe down the device with a dry cloth.
What If My Fitbit Won’t Turn On After Being Dried
If your Fitbit doesn’t turn on after being dried, there are a few things you can do to try and fix the issue. First, make sure that your Fitbit is charged and that the battery is fully charged. If the battery is low, the device may not be able to turn on. Second, try resetting your Fitbit by pressing and holding down the button for five seconds. Finally, if all else fails, you can take your Fitbit to a service center to have it checked out.
Summary
If you are experiencing trouble with your Fitbit after swimming, there are a few things that you can do to try and restore the device. Generally speaking, if your Fitbit is not working properly the first time that you try to use it after being submerged in water, then it is likely damaged and will require replacement. However, by following a few simple steps, you can often get your device up and running again.
If your Fitbit has stopped responding altogether after swimming, though, there may be an issue with either the battery or the tracker itself. In this case, you will likely need to take it into a service center for repair or replacement.
If your Fitbit stops working after swimming, there are a few possible reasons. First, make sure that your Fitbit is properly sealed and that you’re not wearing it in water that is too hot or too cold. If your Fitbit is still not working, try drying it off and then turning it back on. If it still doesn’t work, you may need to contact customer support.