Fitbit Not Working After Swimming? [Do THIS]

Is your Fitbit not working after swimming? We know how frustrating it can be when you’re trying to exercise but your Fitbit doesn’t work.

Don’t panic just yet, because we have the solution you need to get your Fitbit in tip-top shape. In this article, we’ll be exploring the possible reasons for why your Fitbit stopped working, what the solutions are, and how to avoid having this issue in the future.

Fitbit Not Working After Swimming?

If your Fitbit is not responding after wearing it to go swimming, there are several steps you can take to get it back running. First, make sure your device is properly charged. If you don’t have access to a charger, try using a USB port to power your Fitbit up.

If you’re still having trouble, reset your device by holding down the side button for 10 seconds. If the reset works, one of the first steps you should take is to put your device in Dry Mode.

Dry Mode is a feature that’s designed specifically for swimmers. It will limit the amount of exposure your device gets to water and help protect it from even more damage. To activate it, open the Fitbit app, select your device at the top, and scroll down to ‘Dry Mode’. Once you turn it on, make sure to keep it on for at least 12 hours.

If possible, submerge the device in rice overnight and dry it out as much as possible. This should help get rid of any lingering water droplets and help restore its functionality. If the rice trick doesn’t work, you may need to replace the device altogether.

Faulty Wristband

1. Check the band. Inspect the wristband of your Fitbit to determine if there is any physical damage or wear and tear to the material. If the material is worn, cracked, or otherwise damaged, then you will need to replace the band.

2. Dry off your Fitbit. If your Fitbit was exposed to liquid, it could be the cause of the malfunction. Carefully dry the Fitbit with a lint-free cloth and allow it to air dry for a few hours.

3.Clean the contacts. Inspect the contacts of your Fitbit for any dirt or debris. Gently clean the contacts with a toothpick or other nonabrasive tool.

4. Restart your Fitbit. Restarting your Fitbit will reset any corrupted data and can help fix any issues you are having. You can restart your Fitbit by holding down the power button for 10 seconds.

5. Check for an update. If your problem persists, check to see if there is an update available for your Fitbit. You can do this by visiting Fitbit’s website, downloading the app, and looking for updates.

Damage to the Charging Port

If you’ve ever experienced that your Fitbit stopped working after swimming, the problem is potentially due to damage to the charging port.

All you need to do is take the Fitbit out of the water and let it dry thoroughly by using a microfiber cloth to wipe off any residual moisture.

Once you’ve done that, you’ll want to inspect the Fitbit charging port. Make sure there aren’t any visible signs of damage such as water seeping in or rusting that could indicate a problem with the port.

If you discover any damage to your Fitbit charging port, you should take some steps to repair it. First, buy a replacement charging cable for your device.

Then, you should use a small screwdriver or a similar tool to carefully open up the Fitbit and expose the damaged port. Once you’ve located the damaged port, you can use a small brush to brush away any debris or dirt that may have built up inside.

Water Damage to Internal Components

Water damage is a serious issue when it comes to any type of device. When wearing a Fitbit to go swimming, the individual should practice extreme caution, as water can cause serious damage to internal components.

Once the liquid seeps into the material and components of the device, it could potentially reduce its integrity or even corrode certain parts used for tracking data.

This can range from posing a hazard on the batteries’ life span to disabling sensors that read your relative movement in order for you to receive accurate feedback from your equipment.

For instance, if any moisture has gotten past the seals of your wristband or fitness tracker then this will cause an electrical short between important circuit boards and other pieces used within it.

This short-circuiting will result in malfunctioning of some sort since all the necessary elements needed for you to get real time readings cannot communicate with one another any longer due to this damage caused by water-logging.

These instances are hard to fix without professional help but nonetheless either way water will still have a negative effect on how your gear operates considering that such an environment wasn not intended in its design process.

How To Get Your Fitbit Working Again

If your Fitbit stopped working after going swimming, there are a few things you can do to get it working again. First, make sure that the device is completely dry before attempting any troubleshooting steps.

Try wiping off any moisture on the outside of the device with a lint-free cloth and leave it in a warm, dry place for several hours until it is completely dry inside. Once your device has dried out, restart it by pressing and holding the button until you see the Fitbit logo appear on the screen.

You should also check that all port covers are securely fastened and if necessary, remove them temporarily to let air get into these places and help dry them out thoroughly. If this does not work you can try connecting your Fitbit to its charger for at least 20 minutes or so to give it time to reboot itself fully and hopefully restore functionality.

If Bluetooth isn’t enabled on your phone or other device then this could be causing issues with syncing so you will want to make sure that this is also switched on correctly from both devices.

Finally, if none of these methods have resolved the issue then uninstalling/reinstalling apps related to your Fitbit such as Syncing Issues software can sometimes resolve compatibility problems between devices.

Clearing caches in settings or temporarily disabling anti-virus programs may help too as they can interfere with normal operations of applications like this one so lastly worth considering before giving up hope.

Check Inside the Device

The first thing you should always do before taking a dip is to check the inside of the device. Moisture can build-up quickly and cause it to malfunction, be proactive when it comes to checking the internals. Here’s how:

1. Start by removing the device from your wrist and powering it down.
2. Open the back cover of your Fitbit and check for any signs of water damage.
3. Using a microfiber cloth, wipe away any visible moisture from the inside of the device.
4. Put the back cover back on and power it back.

Once you’ve done these steps, you can try to power your Fitbit on again. If it still doesn’t seem to be working, it’s time to take a closer look. Try checking the battery, USB port and other internal components for any signs of corrosion..

Check the Charging Port

Charging ports are a common point of failure in electronic devices and can be easily damaged if submerged in water. To start, make sure the Fitbit device is powered off.

Using a small brush such as an old toothbrush or makeup brush, gently clean out any debris or dirt around the charging pins on both the back and inside of the port. Once thoroughly cleaned, use a q-tip with rubbing alcohol to further clean out any residual gunk.

If your Fitbit doesn’t have a removable band then you may need to remove it from the strap or wristlet in order to see the charging pins located within the inner side of its casing. After cleaning, try plugging in your charger; ensure that all pins on both ends correctly align for proper connection into its port.

If this does not work and there appears to be visible damage on either end then adjusting these contacts using tweezers or needle nose pliers must be done very carefully so as not to further damage them further before discarding for repair or replacement.

If you can’t find any physical damage, but it still fails to take charge then it’s possible that one of its internal components maybe affected from water damage which will require special attention from an authorized technician making sure all wires are secure and intact within its shell casing.

Check the Wristband

To check for water damage, remove the wristband and inspect the device. Look for signs of water buildup or discoloration. If you do spot some water damage, it’s best to replace the wristband.

If you inspect the Fitbit and don’t notice any water damage, then the next step is to check the wristband. Depending on the type of Fitbit, there may be a clasp or a button to secure the band. Make sure that the clasp or button is working properly and secure. If the clasp or button is loose, it could cause the Fitbit to malfunction.

Make sure that the wristband itself is not stretched out. Over time, the elastic material of the wristband can loosen and loosen the device, leading to premature breakdown or malfunction. If the wristband is too loose, it’s best to buy a new Fitbit wristband.

Ensure the wristband is clean. Sweat, dirt, and grime can accumulate on the wristband, which can interfere with the Fitbit’s performance. It’s best to use a cloth and some mild soap to clean the wristband.

Try A Different Charging Cable

If you’ve tried charging your Fitbit with the same cable you’ve always used and it’s still not working, try a different one.

Why does this work? Even if you’ve done all the right things – like taking your battery out of the water right away and drying it off – it’s possible that water has gotten into the charging port of your Fitbit. So when you plug in the same cable as always, it’s just not creating the connection it needs to make.

But when you use a different cable, you get a unique connection. This will help break up the buildup of water and dust on the ports, and give your Fitbit the spark it needs to get back up and running.

Perform a Reset

If your device isn’t responding to your taps or buttons, you may be experiencing a temporary communication issue. A quick fix is to leave the device out of the water and perform a reset. Here’s how you do it:

1. Disconnect and restart your device: Simply start by disconnecting the Fitbit from your phone or computer and restarting it. To do this, hold the button for a few seconds until you see the Fitbit logo or a clock face on the screen.

2. Remove the battery: If that doesn’t work, try removing the battery and letting it sit for at least 10 minutes. After the 10 minutes are up, put the battery back in the device and press the button again to restart it.

3. Dry it off: If you’ve been using the Fitbit during a particularly sweaty or wet swim, the sweat and moisture can cling to the device and interfere with its functionality. So make sure to dry it off completely before trying to restart it.

4. Perform a factory reset: If all else fails, you can also reset your device back to its original factory settings by going into your Fitbit app and selecting the factory reset feature.

How Do I Unlock My Fitbit After Swimming?

Once all the water has been removed, remove the battery and let it air dry. This helps to ensure that any water has been removed from the device and prevents it from short-circuiting. Once the battery is removed, you should then place your Fitbit on a dry cloth or towel and let it air dry for at least 24 hours.

After the device has completely dried, you can then replace the battery and turn on the device to see if it is working. If it is, then your Fitbit should now be unlocked and ready to use. If it is still not working, then it is recommended that you contact Fitbit customer support or take your device in for repair.

How To Look After Your Fitbit When Swimming

Here are five simple tips to keep your Fitbit in top condition after a swim:

1. Rinse Your Fitbit After Swimming – After swimming, make sure to rinse your Fitbit in fresh water. It’s best to avoid extremely hot or cold water as they could damage the protective layer of your device.

2. Avoid Salt Water – Salt water and chlorine are not good for your Fitbit’s screen or the device itself. Be sure to rinse your Fitbit in fresh water as soon as you can after swimming in salt or chlorinated water.

3. Dry Your Fitbit Immediately – After rinsing your Fitbit, be sure to dry it off immediately. This might include using a small towel or a soft lint-free cloth.

4. Store Your Fitbit Properly – Make sure to store your Fitbit somewhere that it won’t be exposed to moisture or water. Ideally, you should keep your Fitbit in a dry plastic bag or a sealed container to ensure maximum protection.

5. Don’t Leave Your Fitbit in the Sun – Direct sunlight can be damaging to your Fitbit, so it’s best to keep it in a shaded area. This includes avoiding leaving your device in your car or in any area where it can get direct sunlight.

Summary

From checking inside the device itself and the charging port for any damage, to trying a different charging cable, it should be possible to get your Fitbit up and running again. If the device has been locked after swimming, there is an easy way to unlock it and ensure your device is working properly.

All in all, there are a few steps you can take to try and get your Fitbit working again after it has been submerged in water, so don’t give up hope just yet.